LED Dome and Rear Bulbs

does anyone can help with photos on how to remove and replace boot bulb to led? thanks..

@snksnk - really no need for photos - gentle pressure behind plastic lens and unit just pops out easily, change bulb and refit.

(10-04-2012 12:26pm)cjfp Wrote:  @snksnk - really no need for photos - gentle pressure behind plastic lens and unit just pops out easily, change bulb and refit.

I replace all 7 interior plus the 1 in the boot yesterday. It took me 20min. I had some trouble with the front upper ones as they were slipping but as soon as i put on rubber gloves it was really easy.. It looks awesome..

Glad nothing got broken!

Got the boot light, front footwells and rear seat lights done tonight - PureEvoque's pictures were invaluable. Will attempt the front dome lights tomorrow evening.

Glad they helped

Very keen on all interior mods as I think they will look great as long as it's not too bright. This thread is great - it's going to make it facile when it comes to it, so thanks all.

I'm a little concerned about the reversing lights. Am I wrong to think that they might look like something that's clearly been changed, simply because they will be far too bright? I'm only really one for changing things that could easily be mistaken for something Gerry implemented himself!

Well I've got all the LED interior lights in - except the three in the front dome.

Using the Stanley knife blade method I've popped the lens open but cant get enough space to get my digits in to pull the bulbs out - I've tried pliers with masking tape on, the bulbs seem so tight that I'm wary of breaking them.

I'm wondering if the alternative is to remove the whole mounting for the lamps - does anyone know how to get that off/out?

Just pull from the rear there are two clips one each side at the rear of the console pull down from rear and the front is slotted. This is the land rover way for removing bulbs.

(31-05-2012 12:31am)garryforrestuk Wrote:  Just pull from the rear there are two clips one each side at the rear of the console pull down from rear and the front is slotted. This is the land rover way for removing bulbs.

Thanks! I'll give that a go, appreciated.