Anyone fitted black bonnet lettering ? - Printable Version +- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum) +-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions) +--- Forum: Modifications (/Forum-Modifications) +--- Thread: Anyone fitted black bonnet lettering ? (/Thread-Anyone-fitted-black-bonnet-lettering) |
RE: Anyone fitted black bonnet lettering ? - GibEvoque - 23-01-2012 10:00pm (23-01-2012 01:16pm)BFGEvoqueMan Wrote: That's what I shall be doing plus a respray of the grill and side fender blades (€100 at my local bodyshop). I shall also do the tailgate finisher strip (once I have worked out how to get it off). looking forward to seeing, mine will be here next week as well. RE: Anyone fitted black bonnet lettering ? - cutter7 - 28-01-2012 02:53pm I have just changed my RR lettering to Gloss Black. At the moment there are no Evoque templates around for the lettering, and suppliers don't know when they will be in! So i had an idea.. First i made my own template by masking around the letters top, bottom and sides of each letter and then warmed the letters using a heat gun on a low setting and i then i used a plastic cable tie to remove the letters by sliding underneath left to right. When the letters were removed i used white spirit to wipe of any residue left, and then replaced with the new Gloss black letters and removed the masking tape.. This took less than an hour to do.. [attachment=1346] [attachment=1347] [attachment=1349] [attachment=1348] [attachment=1350] [attachment=1351] [attachment=1352] [attachment=1353] [attachment=1354] RE: Anyone fitted black bonnet lettering ? - pureevoque - 28-01-2012 03:19pm looks great cutter, where did you get yours from, are they a good match to the originals? RE: Anyone fitted black bonnet lettering ? - cutter7 - 28-01-2012 03:28pm (28-01-2012 03:19pm)pureevoque Wrote: looks great cutter, where did you get yours from, are they a good match to the originals? Got them from powerful_uk_ltd The letters are the same thickness as the originals. RE: Anyone fitted black bonnet lettering ? - cjfp - 28-01-2012 03:55pm Looks good and these do seem to be the site to get them from - can you confirm that the shaped fit against the bonnet is good. Thx. RE: Anyone fitted black bonnet lettering ? - cutter7 - 28-01-2012 04:42pm (28-01-2012 03:55pm)cjfp Wrote: Looks good and these do seem to be the site to get them from - can you confirm that the shaped fit against the bonnet is good. Thx. They fit perfect, @ £70 for bonnet and tailgate so they should!.. Hope this helps. RE: Anyone fitted black bonnet lettering ? - Sarcastrix - 28-01-2012 06:04pm Now you need to photocopy a few dozen templates and stick them on ebay RE: Anyone fitted black bonnet lettering ? - cutter7 - 28-01-2012 07:49pm (28-01-2012 06:04pm)Sarcastrix Wrote: Now you need to photocopy a few dozen templates and stick them on ebay i'm making one now! [attachment=1355] [attachment=1356] [attachment=1358] [attachment=1359] Anyone fitted black bonnet lettering ? - gead - 28-01-2012 09:34pm Great work, that looks fantastic! RE: Anyone fitted black bonnet lettering ? - Samouraï - 29-01-2012 11:51am Looks great!!! |