Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Still trying to figure factory HID upgrade!
Kugaman1
 

Posts: 74
Joined: Sep 2014
Location: Peterhead
Post: #21
RE: Still trying to figure factory HID upgrade!

(30-11-2014 10:15pm)bee Wrote:  kuga, im relying on you to sort out this problem. Confused

Ha ha!

I know what needs to be done....in theory its very simple. Its just a case of tracking down the right connections for the ballast and then trying to get a wiring diagram to see if there is a permanent live running into the light. If not, it might mean running a cable all the way back to the battery.

Ideally, I will find a 30 amp line somewhere nearer the lights and use this to power them from the relay......

I will get there.....eventually!
01-12-2014 10:14am
Find all posts by this user Quote this message in a reply
Jeroma
 

Posts: 116
Joined: Nov 2013
Location: Belgium/France
Post: #22
RE: Still trying to figure factory HID upgrade!

I recently bought a set of 17 inch wheels new with Dunlop tyres. The man gave me xenon light units at a reasonable price and told me it's a plug and play exercise and that he has done it before. Yesterday I spoke to my dealer's mechanic... great surprise... it's not possible for a MY14 Pure he told me unless you replace the loom and a lot more. In addition you will need auto levelling system and power wash to be legal.

As I would like to fit the signature lights my question is how difficult it is to fit halogen lights into a xenon light unit.
As a result of the poor light output I fitted a few month ago GP Thunder 9005 bulbs which perform a little better.
In so far I will follow the thread with great interest.

The mechanic also told me that the Evoque Pure harness was changed at MY14 1/2 providing connections for the levelling device and xenon lights... Does anyone knows about this....

Evoque MY2014 ED4 Pure Tech in Aintree Green - Almond/Expresso, priv. glass, rear camera etc...
other cars in house: Renault Megane CC
1960 Triumph TR3A in BRG - on Webers
1970 Triumph TR6PI in jasmine on EFI
(This post was last modified: 16-12-2014 04:45pm by Jeroma.)
16-12-2014 04:43pm
Find all posts by this user Quote this message in a reply
Kugaman1
 

Posts: 74
Joined: Sep 2014
Location: Peterhead
Post: #23
RE: Still trying to figure factory HID upgrade!

Well, Ive got a MY15 Evoque and when I plugged in my xenons they did not work....

They flash on for a second then go off.
29-12-2014 10:06am
Find all posts by this user Quote this message in a reply
Olhemes
 

Posts: 23
Joined: Sep 2012
Location: Spain
Post: #24
RE: Still trying to figure factory HID upgrade!

Have you tried to put a relay for the cut of light?.
13-03-2015 01:48pm
Find all posts by this user Quote this message in a reply
funguf
 

Posts: 33
Joined: Aug 2013
Location: London
Post: #25
RE: Still trying to figure factory HID upgrade!

This is what you need to convert halogen to xenon

2 x Range rover OEM Xenon headlights with Osram ballasts
2 x Sets of connectors http://www.motorcyclestorehouse.nl/keyword/548258 (you will have one spare mating connector)
1 x HB4/9006 harness like this http://www.theretrofitsource.com/compone...QxdGPnke-0
3 x short HB4 extension cables, you will need to refit the relevant connectors on these so 2 feed the ballasts and 1 feeds the harness trigger wire.

(20-03-2015 06:54pm)funguf Wrote:  This is what you need to convert halogen to xenon

2 x Range rover OEM Xenon headlights with Osram ballasts
2 x Sets of connectors http://www.motorcyclestorehouse.nl/keyword/548258 (you will have one spare mating connector)
1 x HB4/9006 harness like this http://www.theretrofitsource.com/compone...QxdGPnke-0
3 x short HB4 extension cables, you will need to refit the relevant connectors on these so 2 feed the ballasts and 1 feeds the harness trigger wire.

You can probably source the connectors from ebay, I did

SD4 Pure Tech Manual, 5 Door, Fuji White with Black Contrast Roof, Black Grille/Vents/Mirror Caps, Pure Style Pack, Privacy Glass, Mud Flaps.
(This post was last modified: 20-03-2015 06:59pm by funguf.)
20-03-2015 06:54pm
Find all posts by this user Quote this message in a reply
Kugaman1
 

Posts: 74
Joined: Sep 2014
Location: Peterhead
Post: #26
RE: Still trying to figure factory HID upgrade!

I was looking for a way to do this without having to run a live cable from the battery to the headlight.....

Is there a permanent live near the headlight that can be used?
20-03-2015 09:35pm
Find all posts by this user Quote this message in a reply
bee
 

Posts: 337
Joined: Mar 2014
Location: lincolnshire (seaside) uk
Post: #27
RE: Still trying to figure factory HID upgrade!

(20-03-2015 09:35pm)Kugaman1 Wrote:  I was looking for a way to do this without having to run a live cable from the battery to the headlight.....

Is there a permanent live near the headlight that can be used?

in my opinion, there must bee a simple way to retrofit the xenons. im surprised that some electronic whiz kid has not got a solution for it.
so I recon im just going to stay with my stock halogens Sad until I replace my bee. the next evo will have all mod cons. still cannot believe manufacturers are still fitting halogen headlights. Question

2013 auto sicillian yellow special edition. with all the goodies supplied with this model.
21-03-2015 08:43pm
Find all posts by this user Quote this message in a reply
PhilSkill
 

Posts: 3,880
Joined: Jun 2011
Location: Warwickshire
Post: #28
RE: Still trying to figure factory HID upgrade!

On the Adaptive xenon system, the dipped beams are driven from a 21Amp Max FET (BTS443) in the Central Junction Box and the diagram shows 55 Watts for each dipped beam.

There is no 12 V supply going directly to the light unit itself.

Unfortunately I don't have any info for the Halogen installation to know if there is a different output driver to the dipped beam.

Have you checked the Xenons stay on if linked directly to a battery supply (preferably fused), to be sure the light unit you have is working?

MY12 Fuji Dynamic SD4 Manual, Pano Roof, Electric Tailgate with own Close module
[Image: 124529.png][Image: 1004887.png]
(This post was last modified: 22-03-2015 09:15pm by PhilSkill.)
22-03-2015 09:14pm
Find all posts by this user Quote this message in a reply
Kugaman1
 

Posts: 74
Joined: Sep 2014
Location: Peterhead
Post: #29
RE: Still trying to figure factory HID upgrade!

Yes, tried the xenons directly with a battery live, they are fine.

Many other drivers have had the same issue as me, the xenons light up for a second and then go off. I believe the car sees the large initial current draw of the ballast and thinks theres a problem so shuts the light down. Thats the issue that I need to find a way to overcome......

I think the only option is a relay switched permanent live to overcome this issue. Hiwever, I really dont want to run a permanent live all the way from the battery round to the headlights....
24-03-2015 08:26pm
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 4 Guest(s)
babyRR is an independent web site and not affiliated with Land Rover