Roof Lining Removal-Any Ideas

I need to access the underside of my Evoque roof, does anybody have access to Topix and could check if there is a service doc that details this. Not wanting to remove the roof lining, just need access to any part of the underside of roof to fix a small flat metal plate. Dont want to disturb any airbags or wiring looms.
Have already requested advice via Nick@LR, standard response, unable to assist on any none approved modifications. Any help would be appreciated.
Thanks Mick.

Sounds like you want to fit a ground plane for an antenna or a piece of tin pate so you can fit a magmount beacon to the roof ? Try PM'ing or email Pete Bell at BAS

Tim,
You are spot on, just need to mount a small 150mm epoxy coated steel plate with double sided adhesive tape. Will send Pete a PM. Thanks.

(13-04-2012 01:04pm)XFullFatTim Wrote:  Sounds like you want to fit a ground plane for an antenna or a piece of tin pate so you can fit a magmount beacon to the roof ? Try PM'ing or email Pete Bell at BAS

Pete's your man for this!

Sent Pete a PM but no response, if anyone else can access Topix service docs and let me know if there are any details relating to roof lining removal.
Would be most helpful,
Thanks
Mick

There was nothing on Topix about the roof lining removal, when I looked just over a week ago.

Thanks for that RacingSnake.
Might have to do a little exploratory work on headlining then.
Cheers for the reply.

(15-04-2012 07:19am)RacingSnake Wrote:  There was nothing on Topix about the roof lining removal, when I looked just over a week ago.

Thanks to those of you who could be bothered to look on Topix for me. Another member very kindly sent me the document on roof headlining removal. If anyone needs a copy, please pm me and I will forward.