Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding USB connection to 5" radio
harry
 

Posts: 51
Joined: Mar 2012
Location: Prague, CZ
Post: #1
Adding USB connection to 5" radio

I´m thinking of adding USB connection to my standard Pure 5" radio which I did not quote for when ordering. Does anybody know to where the USB connection is plugged into and how the connector/wiring looks like ?
I beleive it is connected to the rear of CD box but may be wrong. Thanks for any comments.
23-02-2013 04:53pm
Find all posts by this user Quote this message in a reply
harry
 

Posts: 51
Joined: Mar 2012
Location: Prague, CZ
Post: #2
RE: Adding USB connection to 5" radio

this is how the connector should look like from the back of CD unit:


Attached File(s) Thumbnail(s)
   
03-06-2013 09:45am
Find all posts by this user Quote this message in a reply
PhilSkill
 

Posts: 3,880
Joined: Jun 2011
Location: Warwickshire
Post: #3
RE: Adding USB connection to 5" radio

A complete guess but have you checked with a meter to see if you have 5V on pins 1 and 4 (looks like it maybe a 4 pin connector) if so it'll likely be standard USB wiring...? You might be able to run an extension if you can find a connector that fits...?

MY12 Fuji Dynamic SD4 Manual, Pano Roof, Electric Tailgate with own Close module
[Image: 124529.png][Image: 1004887.png]
03-06-2013 12:02pm
Find all posts by this user Quote this message in a reply
harry
 

Posts: 51
Joined: Mar 2012
Location: Prague, CZ
Post: #4
RE: Adding USB connection to 5" radio

no chance to measure as the power cabel is too short and both, power and usb connector are at the back of the unit. I will check with dealer if the original cable can be ordered.
03-06-2013 06:53pm
Find all posts by this user Quote this message in a reply
villou16
 

Posts: 1
Joined: Dec 2012
Location: France
Post: #5
RE: Adding USB connection to 5" radio

(03-06-2013 06:53pm)harry Wrote:  no chance to measure as the power cabel is too short and both, power and usb connector are at the back of the unit. I will check with dealer if the original cable can be ordered.

Hi, Have youd find a solution?
I have tried whith a Honda adaptator which is the same connector, but it doesn't work.
Powwer supply of the usb key is ok but nothing with the data.

If you succed, can you explain me ?
20-12-2014 04:54pm
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 4 Guest(s)
babyRR is an independent web site and not affiliated with Land Rover