babyRR.com - The Range Rover Evoque Forum
Can you identify these? - Printable Version

+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: General (/Forum-General)
+--- Thread: Can you identify these? (/Thread-Can-you-identify-these)



Can you identify these? - Dyn - 02-09-2015 10:57pm

Purchased a Dynamic (Lux) over the weekend and took delivery of it yesterday - what a great car it is so far!

I've found these in my glove compartment - they look to be some kind of pull tabs but I can't see where they're from. Do they look familiar to anyone? Mainly, I just want to know if I can throw them in the bin or not!

[Image: hk9ZJd4.jpg]


RE: Can you identify these? - Bruno787 - 02-09-2015 11:36pm

(02-09-2015 10:57pm)Dyn Wrote:  Purchased a Dynamic (Lux) over the weekend and took delivery of it yesterday - what a great car it is so far!

I've found these in my glove compartment - they look to be some kind of pull tabs but I can't see where they're from. Do they look familiar to anyone? Mainly, I just want to know if I can throw them in the bin or not!

[Image: hk9ZJd4.jpg]

They are mounting tabs for your front and rear mats, just screw them down on your carpet. Do note that the mounting holes for the rear rubber and rear carpet mats are different (AFAIK).


RE: Can you identify these? - Dyn - 02-09-2015 11:49pm

Awesome - thanks! I'll take a look in the morning.


RE: Can you identify these? - PhilSkill - 03-09-2015 09:03am

The fronts should already be fitted by your dealer, these are the rears and are not really necessary so the dealer does not fit. I have 4 in my glove box too nearly 4 years on!


RE: Can you identify these? - Dyn - 03-09-2015 10:05am

Yep just had a check and they are for the rear - but there's no holes for the rears (for my 3 door anyway). I'll keep them in the boot just in case! Thanks guys.


RE: Can you identify these? - XFullFatTim - 03-09-2015 10:13am

No holes are required, you just screw the fitting through the carpet then hook the mats over the arrow shaped bit, there should be holes in the rear foot well mats though.


RE: Can you identify these? - Dyn - 03-09-2015 04:46pm

There's holes in the mats but not in the actual foot well part:

[Image: kFAYK8e.jpg]

[Image: i5E8qYG.jpg]

Not a big issue - was just wondering where they came from! I've put them in a small back in the boot just in case I ever need them!

Thanks guys.


RE: Can you identify these? - XFullFatTim - 03-09-2015 06:04pm

There aren't holes because you don't need them, the course threaded part of the hook just selftaps into the carpet pile.
If they aren't fitted then you should at least fit them to the driver's footwell if you have the mats there. They are to stop the mat creeping forward and preventing the pedals going right down, especially the brake and clutch pedals. There were incidents in a previous generation of RRS where there was a series of accidnets because people were not using the right footwell mats and that pre3vented the brake from being press fully down as the mat had bunched up under the brake pedal................


RE: Can you identify these? - Dyn - 03-09-2015 09:21pm

(03-09-2015 06:04pm)XFullFatTim Wrote:  There aren't holes because you don't need them, the course threaded part of the hook just selftaps into the carpet pile.
If they aren't fitted then you should at least fit them to the driver's footwell if you have the mats there. They are to stop the mat creeping forward and preventing the pedals going right down, especially the brake and clutch pedals. There were incidents in a previous generation of RRS where there was a series of accidnets because people were not using the right footwell mats and that pre3vented the brake from being press fully down as the mat had bunched up under the brake pedal................

I've already got them in place for the front mats which is why I was confused - not sure why they added 4 extras when they aren't needed in the back but keeping them in case I ever need to replace the fronts!