babyRR.com - The Range Rover Evoque Forum
20mm spacers fitted - Printable Version

+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Modifications (/Forum-Modifications)
+--- Thread: 20mm spacers fitted (/Thread-20mm-spacers-fitted)

Pages: 1 2 3 4 5 6


20mm spacers fitted - Rein - 16-06-2013 10:10am

fitted them today, 20mm H&R DRM system

[Image: image_7_zpseb063ede.jpeg~original]

[Image: image_6_zpsf4321dca.jpeg~original]

[Image: image_5_zps3a4c7470.jpeg~original]

[Image: image_4_zpsae553dc0.jpeg~original]
without
[Image: image_9_zpsf8d68ffb.jpeg~original]
with
[Image: image_8_zps619f773b.jpeg~original]


RE: 20mm spacers fitted - Crimdog - 16-06-2013 10:19am

Me likey Smile
Any adverse effects? How much we're they? Legality?


RE: 20mm spacers fitted - Rein - 16-06-2013 10:39am

No adverse affects so far, all legal (TüV) documents came with the spacers. As long as the wheels/tires aren't wider than the wheel arches you're ok in Holland.
Can be bought via eBay for about 90€ excl shipping per axle


RE: 20mm spacers fitted - LIONHEAD - 16-06-2013 07:16pm

Looks much better! Cool


RE: 20mm spacers fitted - Rein - 16-06-2013 07:22pm

Thanks, I think it looks beter also. Have seen one with 30mm. It looks too wide, not subtle. Glad I went for the 20mm.


RE: 20mm spacers fitted - WB - 16-06-2013 08:20pm

Very nice and subtle!


RE: 20mm spacers fitted - Crimdog - 16-06-2013 11:34pm

Illegal in aus, not allowed to use any spacers or conversions at all. I will prob just go for a slightly wider tyre when the stock ones wear down.


RE: 20mm spacers fitted - jos - 17-06-2013 09:45am

i did mine , last year also
+/+ 20 mm each wheel
and some lowering > perfect drivingexperience

rein
volgens mij hebben we elkaar weleens gesproken bij de miniclub


RE: 20mm spacers fitted - heronb - 17-06-2013 12:40pm

Not normally a fan of mods etc but that looks good


RE: 20mm spacers fitted - speary - 20-06-2013 06:46pm

Just noticed in your pics that the original bolts stand proud of the spacer face. Have you checked that the back face of the wheel is flush to the face of the spacer and is not pressing in the protruding bolts. If they are the pressure when you tightened the new bolts could cause fracturing of your wheels