+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Technical (/Forum-Technical)
+--- Thread: How to check auto levelling on xenon is working? (/Thread-How-to-check-auto-levelling-on-xenon-is-working)
How to check auto levelling on xenon is working? - deadliner - 27-05-2013 10:53pm
Hello Guys.
How do I check, auto levelling on my adaptive xenons is working.
Recently I noticed I have my beam very low. I took it to my dealer and now they are a little too high. I thought some computer is making sure they are in optimal position. Not some guy with screw driver.
1. Can I set them to be a little lower?
2. How exactly autoleveling works? Can I check it out?
3. How do I find what is the correct level of the beam?
I know, dealer should be responsible for all of the above. But I would like to understand it myself anyway.
Thank you!
RE: How to check auto levelling on xenon is working? - XFullFatTim - 28-05-2013 09:36am
Not much help but this isn't my first Land Rover with adaptive xenon headlights but it is the first where they haven't done a little self check "dance" on start-up or if stopped in traffic at night on a slope.