+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Modifications (/Forum-Modifications)
+--- Thread: Retrofit heatet steering wheel (/Thread-Retrofit-heatet-steering-wheel)
Retrofit heatet steering wheel - Mounty - 14-02-2012 10:25am
Is it possible to retrofit the heatet steering wheel?
RE: Retrofit heatet steering wheel - RacingSnake - 14-02-2012 10:29am
There is a video on youtube showing removal of the steering wheel, with the intentino of a heated wheel retrofit.
Since all controls are on the wheel I would say 'yes' retrofit is possible.
RE: Retrofit heatet steering wheel - WB - 14-02-2012 05:59pm
Yes it is possible - there is a video on youtube which shows the parts needed and another two videos showing how to remove the old one and fit the new one. Its not going to be cheap though - you need the steering wheel itself, new left hand control pack, a short wiring loom that goes inside the steering wheel and a replacement central section that the steering wheel attaches to.
RE: Retrofit heatet steering wheel - cjfp - 14-02-2012 06:06pm
or .... you could buy some gloves
RE: Retrofit heatet steering wheel - XFullFatTim - 14-02-2012 07:59pm
It's also been quite a common modification among the FFRR & Disco3 guys, if you take a look over on Disco3.co.uk and FullFatRR.com you may find posts about how to go about the conversion
RE: Retrofit heatet steering wheel - edgedata - 15-02-2012 12:28am
Powerful.co.uk have a how to on exactly this.
How to remove the steering wheel
How to retrofit the heated steering wheel
Evoque steering wheel components
Hope that helps