Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
VIN number decode
obleia
 

Posts: 5
Joined: Oct 2011
Location: Bacelona
Post: #1
VIN number decode

My dealer told me my chassis number but just the last digits CHXXXXXX
I want to check it on TOPIx.

Anyone has a full VIN, corresponding to an EVOQUE PURE 4X4 150hp DIESEL manual gear box?
I just need the first digits before the "CHXXXXXX"
24-10-2011 08:20pm
Find all posts by this user Quote this message in a reply
PhilSkill
 

Posts: 3,880
Joined: Jun 2011
Location: Warwickshire
Post: #2
RE: VIN number decode

(24-10-2011 08:20pm)obleia Wrote:  My dealer told me my chassis number but just the last digits CHXXXXXX
I want to check it on TOPIx.

Anyone has a full VIN, corresponding to an EVOQUE PURE 4X4 150hp DIESEL manual gear box?
I just need the first digits before the "CHXXXXXX"

See the "putting some numbers on things" thread.

MY12 Fuji Dynamic SD4 Manual, Pano Roof, Electric Tailgate with own Close module
[Image: 124529.png][Image: 1004887.png]
24-10-2011 09:03pm
Find all posts by this user Quote this message in a reply
ED209
 

Posts: 1,128
Joined: Aug 2011
Location: durham
Post: #3
RE: VIN number decode

(24-10-2011 08:20pm)obleia Wrote:  My dealer told me my chassis number but just the last digits CHXXXXXX
I want to check it on TOPIx.

Anyone has a full VIN, corresponding to an EVOQUE PURE 4X4 150hp DIESEL manual gear box?
I just need the first digits before the "CHXXXXXX"

what i have ordered i was told they are not producing them at all until late november? can you shed any light?
24-10-2011 09:06pm
Find all posts by this user Quote this message in a reply
mark_n
 

Posts: 1,720
Joined: Jul 2011
Location: London
Post: #4
RE: VIN number decode

Look at the Wiki info Pete has posted at the top of this forum. The document allows you to construct the VIN from the car spec and add your serial no.

Mark

Evoque was great, now in an RRS SVR
24-10-2011 09:11pm
Find all posts by this user Quote this message in a reply
berlin2011
 

Posts: 619
Joined: Jun 2011
Location: South Africa
Post: #5
RE: VIN number decode

It will be

SALVA +1 (if coupe) or 2 if 5 door +D (LHD, Manual) +B or C (B low power diesel, C low power diesel with DPF +@ (I'll explain @ below) + CHXXXXXX

ie SALVA1DC@CHXXXXXX would be a coupe LHD manual car with low power diesel and DPF

The @ is a check digit (0-9) which I don't know how they calculate so do the rest of the VIN and then try combinations 0-9 in turn till you get one the one that works.

Current: SD4 Dynamic Auto, 5 Door, Orkney Grey with Black Contrast Pano roof and 20" Shadow Chrome wheels. Pursuit interior. [countdown="Hand over"]15th June 2013 2:00pm[/countdown]

Gone: Si4 Prestige Auto Coupe, Orkney Grey with Panoramic Roof, Element interior, Shadow Chrome 20" wheels with most of the bits & pieces loaded. [countdown="Hand over"]29th November 2011 2:00pm[/countdown]
24-10-2011 09:17pm
Find all posts by this user Quote this message in a reply
XFullFatTim
Bat wielding forum enforcer

Posts: 9,295
Joined: Oct 2010
Location: Somewhere between here and there.
Post: #6
RE: VIN number decode

And NEVER post your full VIN on any forum - it gives away so much info about the car and of course can be cloned into forged registration documents. Also Land Rover, like many car makers require a dealer's parts dept to provide a VIN before they will release certain parts. Goodness knows how many RRS HST front grilles LPR's demo car lost on the motorway..................... but you needed an HST kitted car's VIN to get hold of one when the kit first came out, now every accessory maker has a version in their range and for a lot less than LR sells them too. I had a Freelander 1 that I wanted a boot liner mat for, not the usual one but the full length one fitted to a Freelander Commercial built by LR Special Vehicles Division - couldn't get hold of one because my local dealer didn't hadn't sold a Freelander1 Commercial so had no Vin to order with.

A Pangea Green New Defender 110 First Edition is now sitting on my drive alongside British Racing Green Electric Mini Cooper SE Level 3. After 21 years in my hands my TDI300 90 was handed on to the next custodian on 15 July 2022.
(This post was last modified: 24-10-2011 09:30pm by XFullFatTim.)
24-10-2011 09:29pm
Find all posts by this user Quote this message in a reply
obleia
 

Posts: 5
Joined: Oct 2011
Location: Bacelona
Post: #7
RE: VIN number decode

(24-10-2011 09:29pm)XFullFatTim Wrote:  And NEVER post your full VIN on any forum - it gives away so much info about the car and of course can be cloned into forged registration documents. Also Land Rover, like many car makers require a dealer's parts dept to provide a VIN before they will release certain parts. Goodness knows how many RRS HST front grilles LPR's demo car lost on the motorway..................... but you needed an HST kitted car's VIN to get hold of one when the kit first came out, now every accessory maker has a version in their range and for a lot less than LR sells them too. I had a Freelander 1 that I wanted a boot liner mat for, not the usual one but the full length one fitted to a Freelander Commercial built by LR Special Vehicles Division - couldn't get hold of one because my local dealer didn't hadn't sold a Freelander1 Commercial so had no Vin to order with.

thanks for the advice
Thanls I've found my car on Toppix, is SALVA2DC low power diesel, I've ordered an 150PS diesel, but on Topix says it's a 190PS!!

Engine: 2.2L CR DI 16V 14 DSL 190PS

How is this possible?
(This post was last modified: 24-10-2011 10:09pm by obleia.)
24-10-2011 09:46pm
Find all posts by this user Quote this message in a reply
QUATTROMAN
 

Posts: 81
Joined: Mar 2011
Location: Devon
Post: #8
RE: VIN number decode

(24-10-2011 09:46pm)obleia Wrote:  thanks for the advice
Thanls I've found my car on Toppix, is SALVA2DC low power diesel, I've ordered an 150PS diesel, but on Topix says it's a 190PS!!

Engine: 2.2L CR DI 16V 14 DSL 190PS

How is this possible?

All the diesel engines are built as 190 SD4's and only after allocation to a VIN number are they loaded up with the software that designates 150 or 190 in the engines ECU mapping- There is absolutly no difference between TD4 and SD4 engines- see this thread on freelander 2 (same engines) http://www.freel2.com/forum/post88892.html

Fuji White 5 door Dynamic SD4 AUTO +LUX PACK + Adaptive Xenons -Built 22-12- 2011 - delivered 12-1-12
(This post was last modified: 25-10-2011 02:30pm by QUATTROMAN.)
25-10-2011 02:30pm
Find all posts by this user Quote this message in a reply
Rossy100
 

Posts: 126
Joined: Nov 2011
Location: Manchester
Post: #9
VIN number decode

Just been given my VIN..... But it has CE after Salva2.....not BC or BD..... What does this mean?

Incidentally, when I try to find in topix it says 'VIN not found'

Thanks

Update: have now read the wiki...... And understand what the letters mean!
(This post was last modified: 07-06-2012 07:20am by Rossy100.)
07-06-2012 07:14am
Find all posts by this user Quote this message in a reply
Neo
 

Posts: 542
Joined: Mar 2012
Location: Sydney, Australia
Post: #10
VIN number decode

Which wiki page rossy?

SD4 Dynamic, Fuji white 5 door
Pano roof, Adaptive Dynamics, style 7 wheels, auto tailgate, reverse camera, rear vents

Ordered: April 2012 | Built: June 2012 | Delivered: 14 August 2012
08-06-2012 02:50pm
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)
babyRR is an independent web site and not affiliated with Land Rover