Fog light surrounds

Hello friends,

I have a doubt....

I would like to put trim around the fog of autobiography to mine wearing a dinamic bumper.

I talked to the dealer and tells me it is not possible for the bumper of the autobiography is different. Yes, but I think in this area are the same.

Someone has tried or installed and can get me out of doubt.

Thank you.

These are the trims.

I too have been wanting to know if the Autobiography fog surrounds would fit my Dynamic bumper as well. Might just have to buy a pair and see for myself.

Hi Turbolover!,
some guys on the Italian Evoque forum have done what you would like to do. You will need to make some minor changes to the part, but nothing too difficult: some pins need to be cut, if I remember correctly.

See you!,
Eos

(13-02-2016 12:11pm)EosMilan Wrote:  Hi Turbolover!,
some guys on the Italian Evoque forum have done what you would like to do. You will need to make some minor changes to the part, but nothing too difficult: some pins need to be cut, if I remember correctly.

See you!,
Eos

Thanks Eos.

Can you tell me the link of Italian Evoque forum, where theya are talking about of this installation?

Thanks again.

There is an Italian section on this forum, see the home page, might be worth a try?

(14-02-2016 05:29pm)jeffersj Wrote:  There is an Italian section on this forum, see the home page, might be worth a try?

Thanks Jeff

I was to searching in the italian evoque forum directly.

I am going to see where you say me.

Hi Turbolover!,
here is the direct link to the thread you could be interested in: http://evoque.forumfree.it/?t=70379666&st=90 .
There are plenty of pictures. Reading what the users have written, it is quite simple: when you get the Autobiography surrounds, they must be modified on the back, creating a hole in the bumper. There will pass through four screws that will keep the new elements firmly attached to the non-Autobiography bumper. I guess it will be more clear when you get the parts.

See you!,
Eos

(14-02-2016 11:57pm)EosMilan Wrote:  Hi Turbolover!,
here is the direct link to the thread you could be interested in: http://evoque.forumfree.it/?t=70379666&st=90 .
There are plenty of pictures. Reading what the users have written, it is quite simple: when you get the Autobiography surrounds, they must be modified on the back, creating a hole in the bumper. There will pass through four screws that will keep the new elements firmly attached to the non-Autobiography bumper. I guess it will be more clear when you get the parts.

See you!,
Eos

Thx EOS.

I am going to wacht.....I hope that the translator helpme, LOL

I might make me a set of these in CF once I finish the center console hockey sticks I'm making. I have a Pure so the size might be different though.

(15-02-2016 04:26pm)Turbolover Wrote:  Thx EOS.

I am going to wacht.....I hope that the translator helpme, LOL

Hi Turbolover!,

(15-02-2016 04:26pm)Turbolover Wrote:  I am going to wacht.....I hope that the translator helpme, LOL

Just let me know.. I am Italian so I could surely help!

See you!!,
Eos