Black "Range Rover" wording badge front and back

(23-08-2012 09:33am)chiggy Wrote:  I've just ordered some from eBay.

Let's see how they turn out! I'll keep you updated.

If not then will just paint the originals.

Shouldn't be too much of a drama.

similar to this?

http://www.ebay.com/itm/GLOSS-BLACK-RANG...685wt_1334

There the same as powerful. But it will will come with a straight temp plate frame. You will need to cut it about & use some masking tape to get the correct curve of the bonnet boot.

Very Blue Peter

No template when I got mine for the tailgate. Just put a 2" strip of masking tape above and below each letter and marked the corners of the letters where they met the tape with pencil. Removed one letter then replaced. Took about 2 mins per letter and the result suits me and my OCD! It realy isn't difficult!

(23-08-2012 05:26pm)cs33wa Wrote:  similar to this?

http://www.ebay.com/itm/GLOSS-BLACK-RANG...685wt_1334

that's the one.

The template might not be straight but that's ok - it's just a matter of getting some masking tape and doing it myself if the template isn't completely right.

It looks decent enough! if its not i'll just paint the originals so not really an issue.

Oh god!!
Read a thread here saying that the new evoque MY13 might come without the Rang Rover badge at the back!!!

---

(24-08-2012 03:11am)chiggy Wrote:  that's the one.

The template might not be straight but that's ok - it's just a matter of getting some masking tape and doing it myself if the template isn't completely right.

It looks decent enough! if its not i'll just paint the originals so not really an issue.

Hi mate,

Let me know the quality and fit when you received.
Dying to hear from you.
Thanks!!

(24-08-2012 04:39am)cs33wa Wrote:  Oh god!!
Read a thread here saying that the new evoque MY13 might come without the Rang Rover badge at the back!!!

I hope it won't; I want mine to read "Range Rover":lol: