BAS OBD remap interface LIMITED christmas offer, 25 UNITS ONLY

So from the snap shot of your software would I be correct in assuming that if I had an ed4 I would be free to switch from the 190 map and your tuned map?

What I really mean is would you provide both maps with the OBD tool allowing me to chose standard, 190 or 228 or would I have to chose between 190 or 228 at point of ordering?

Many Thanks

Keith

(07-12-2012 12:25pm)keweller Wrote:  So from the snap shot of your software would I be correct in assuming that if I had an ed4 I would be free to switch from the 190 map and your tuned map?

What I really mean is would you provide both maps with the OBD tool allowing me to chose standard, 190 or 228 or would I have to chose between 190 or 228 at point of ordering?

Many Thanks

Keith

Correct, yes.

The interface holds 2 maps as standard and will if needed give the function to clear any fault codes.

The 2 maps that are held would be always a standard and any of the tuned you wish. you could load it with the OEM-190 or the BAS tuned files. You are free to change what tuned map you have on the interface when ever you like with the PC application.

Here is a picture of the interface, sorry for the poor quality picture, my camera is not the best



Pete

Can you send it here in Italy? How do I have to proceed for ordering?

Hi
Yes i can use UPS for delivery to Italy no problem.

To order i need to know the following in PM, email or on the phone.

Full shipping address WITH a contact phone number for UPS to use.
Visa or Master card details for the payment.

And car details ill need are. Registration plate number, chassis number, Model eD4,Sd4,Td4 , Gearbox type, Engine BHP.
The car details are used to activate the interface and preset up an account on the web server ready for the tool arriving, this saves time for you when the tool arrives to create the tuning for it as the PC software uses the web server to deliver your tuning directing into the interface after you initially connect it to the car.

Regards Pete

Hi again Pete
Are the units available now ready?
L

Hi
Yes they are available.

Pete

Added some instructions to the first post for the members who have already ordered and have interfaces sent out.

Pete

Pete for some reason I don't have permission to send a PM. I'll call you in the morning.
L

(13-12-2012 12:43am)stiman Wrote:  Pete for some reason I don't have permission to send a PM. I'll call you in the morning.
L

You need 5 posts before u can PM