Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't decide!
PhilSkill
 

Posts: 3,880
Joined: Jun 2011
Location: Warwickshire
Post: #21
RE: Can't decide!

It was certainly a factor lower than the Manual Tim, I always though the Manual needed a longer 6th gear as the Revs were unnecessarily high on Motorways.

I agree Pete, it's one of the reasons they've manage to make the 9 speeder more economical, and Motorway journey MPG in the Manual are definitely a bit poor because of the higher Revs if you're pushing on!

MY12 Fuji Dynamic SD4 Manual, Pano Roof, Electric Tailgate with own Close module
[Image: 124529.png][Image: 1004887.png]
16-11-2015 06:40pm
Find all posts by this user Quote this message in a reply
coastev
 

Posts: 14
Joined: Feb 2015
Location: C Coast NSW
Post: #22
RE: Can't decide!

(16-11-2015 06:14pm)XFullFatTim Wrote:  IIRC from my 9 speeder it sat at about 1300RPM at 70 but I stand to be corrected on that.

I concur with ~1300 rpm, oh hang on in Oz that would be breaking the speed limit, so I have obviously never speeds that dangerous beforeLaughing

To be honest I can count the changes up to about 7th, but dont easily detect the 7-8-9 changes. But the gaps between 1-2-3 seem quite wide and this is where I notice some hesitation in the change.
16-11-2015 10:28pm
Find all posts by this user Quote this message in a reply
Nagaman
 

Posts: 4
Joined: Nov 2015
Location: Victoria
Post: #23
RE: Can't decide!

(16-11-2015 10:28pm)coastev Wrote:  I concur with ~1300 rpm, oh hang on in Oz that would be breaking the speed limit, so I have obviously never speeds that dangerous beforeLaughing

To be honest I can count the changes up to about 7th, but dont easily detect the 7-8-9 changes. But the gaps between 1-2-3 seem quite wide and this is where I notice some hesitation in the change.
70 is near enough to legal on our interstate freeways but I guess there would be quite a bit of down-shifting for undulating terrain.
18-11-2015 10:12am
Find all posts by this user Quote this message in a reply
Pete
 

Posts: 171
Joined: Oct 2015
Location: Wokingham
Post: #24
RE: Can't decide!

(16-11-2015 10:28pm)coastev Wrote:  To be honest I can count the changes up to about 7th, but dont easily detect the 7-8-9 changes. But the gaps between 1-2-3 seem quite wide and this is where I notice some hesitation in the change.

Use the paddles to see what gear you're in. When you're cruising, hit the right hand paddle and see if the revs dip. The actual gear will also display in the centre screen. If the revs don't dip and you see '9' then you'll know that automatic mode is reaching that gear. I have no idea if the ZF block-shifts upwards under acceleration (don't forget that it'll usually pull away in 2nd gear) - if that's the case, then counting lurches won't work.

Porsche Macan
18-11-2015 10:19am
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)
babyRR is an independent web site and not affiliated with Land Rover