babyRR.com - The Range Rover Evoque Forum
Footrest Finisher - New LR Accessory VPLVS0178 - Printable Version

+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Modifications (/Forum-Modifications)
+--- Thread: Footrest Finisher - New LR Accessory VPLVS0178 (/Thread-Footrest-Finisher-New-LR-Accessory-VPLVS0178)

Pages: 1 2 3 4 5 6


Footrest Finisher - New LR Accessory VPLVS0178 - berlin2011 - 22-08-2012 04:59pm

So finally LR caught on to the need for something to put over the carpet...

https://topix.landrover.jlrext.com/topix/content/document/view?id=207432


RE: Footrest Finisher - New LR Accessory VPLVS0178 - SebM - 22-08-2012 05:48pm

Interesting ! Any pics ? Price information ?


RE: Footrest Finisher - New LR Accessory VPLVS0178 - mark_n - 23-08-2012 05:18am

Looks good, you need to drill 3 holes with a depth limiter of 15mm. I wonder what's behind there to get wiped out if you go further?


RE: Footrest Finisher - New LR Accessory VPLVS0178 - doug - 23-08-2012 05:38am

(23-08-2012 05:18am)mark_n Wrote:  Looks good, you need to drill 3 holes with a depth limiter of 15mm. I wonder what's behind there to get wiped out if you go further?

I fitted a aftermarket set & had to drill the holes for the bolts, once the rubber paddle boot is removed the metal paddle is only about 5mm. The depth limiter of 15mm could be to stop you from hitting the carpet when drilling with the paddle fully pressed down.


Footrest Finisher - New LR Accessory VPLVS0178 - Jai - 23-08-2012 07:06am

LHD version only?


Sent from my iPhone using Tapatalk


RE: Footrest Finisher - New LR Accessory VPLVS0178 - XFullFatTim - 23-08-2012 08:55am

Jai, that was my first thought but if you look carefully the position of the RHD one is against the bulge for the transmission which almost matches the wheel arch of the LHD cars


RE: Footrest Finisher - New LR Accessory VPLVS0178 - chiggy - 23-08-2012 09:35am

the LHD cars have a slightly bigger area on the left side as that side is technically against the outside of the car rather than the closer to the engine/centre consol.

Also it's a bit weird that LR haven't released that document with RHD pictures given the majority of cars they produce are RHD and LR themselves are "English".


Footrest Finisher - New LR Accessory VPLVS0178 - Maarten - 23-08-2012 12:14pm

VPLVS0177 is the RHD version. See Topix for details.


RE: Footrest Finisher - New LR Accessory VPLVS0178 - speary - 23-08-2012 12:50pm

If you are drilling the footrest area are you not drilling the floorpan. I would have thought that you will end up with a footwell full of water the next time it rains


RE: Footrest Finisher - New LR Accessory VPLVS0178 - Lone Rangerover - 23-08-2012 04:54pm

(23-08-2012 12:14pm)Maarten Wrote:  VPLVS0177 is the RHD version. See Topix for details.

Can someone post the "topix" pics and info here, because I can't seem to view anything other than the border on the link.

Very timely - as I was just wondering why this wasn't covered by a pedal or a mat from LR at the factory.

Would love to see what this looks like.