babyRR.com - The Range Rover Evoque Forum
part information - Printable Version

+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Technical (/Forum-Technical)
+--- Thread: part information (/Thread-part-information)

part information - mega-auto - 16-07-2013 12:49am

hi, i had an accident with my evoque Sad
this pulley broke off, is from the air compressor
[img=http://s7.postimg.org/4lggryh1z/photo.jpg]

[img=http://s7.postimg.org/z4auqnvmf/photo_1.jpg]

i want to know if replacable without taking the air compressor out
any help?

RE: part information - RacingSnake - 17-07-2013 09:20am

Looks like the tensioner pulley.
I can't answer your question directly, but if you're looking to do this yourself, then you must be reasonably mechanically minded, at which point you should be able to see if the compressor is bolted to any part of the pulley mounting casting.
To be honest, you're going to have to start to take it apart and see when you get to that point.

And report back when you find out Wink Very Happy

RE: part information - WB - 17-07-2013 05:00pm

check out lrparts.ru - go to the parts area at the bottom of the front page and you can get diagrams for all the parts.

RE: part information - mega-auto - 18-07-2013 02:43am

(17-07-2013 05:00pm)WB Wrote:  check out lrparts.ru - go to the parts area at the bottom of the front page and you can get diagrams for all the parts.

thanks, they were more detailed than the ones you find on the parts shop website.

the part i showed is the smooth iddler pulley (#5)

[Image: 7125050.gif]

the pulley is fine, is the mount (#7) that broke Crying more expensive, 350$
tomorrow i will dismount the alternator to see if is easy to replace.

i need to replace:
-radiator
-maybe oil cooler (bent but not leaking)
-headlight waher pump
-wiper water reservoir
-iddler pulley mount
-right fog light
-maybe the wire harness that connect the front sensors
i hope thats all!!
can someone here confirm that the topix website has any info about dismounting the cooling system or belt system? the website doesnt accept the creditcard from my country Sad