![]() |
TPSM - Fitting after vehicle has been purchased - Printable Version +- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum) +-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions) +--- Forum: Modifications (/Forum-Modifications) +--- Thread: TPSM - Fitting after vehicle has been purchased (/Thread-TPSM-Fitting-after-vehicle-has-been-purchased) |
TPSM - Fitting after vehicle has been purchased - bloubul7 - 09-07-2013 09:53am Hi Guys, Is it possible to fit the tyre pressure monitoring system after the vehicle has been purchased? I bought a demo model Si4 Dynamic 5 door and the vehicle came without TPSM. Is it as easy as just fitting the valve sensors? I spoke to our local Land Rover parts and they said I need to change all of the wiring harnesses etc. Is this true? Thanks RE: TPSM - Fitting after vehicle has been purchased - WB - 09-07-2013 02:24pm I haven't seen anyone retrofit TPMS but that is a typical dealer reply to any retro-fit. There are lots of aftermarket systems which are better than the LR one as they will tell you the pressure not just that the tyre is flat. RE: TPSM - Fitting after vehicle has been purchased - jitenc - 09-07-2013 09:20pm Forget the LR one. Pretty useless for £400. Fair enough it was good on one occasion but not for that amount of money.. RE: TPSM - Fitting after vehicle has been purchased - bloubul7 - 09-07-2013 09:26pm Thanks guys. Will rather get an aftermarket system |