+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Detailing & Car Care (/Forum-Detailing-Car-Care)
+--- Thread: Protecting new alloys (/Thread-Protecting-new-alloys)
Protecting new alloys - Evogirl - 15-02-2013 08:57pm
Collecting new car in 2 weeks but need advice on something to coat my alloy wheels in so that they stay clear of road dirt etc, does anybody rate Poorboys?
RE: Protecting new alloys - superfox - 15-02-2013 09:12pm
Check out Nanolex they have kept my Evoque looking like new for 4 months now! Including the rims ^_^
http://www.nanolex.de/en/products
RE: Protecting new alloys - doug - 15-02-2013 11:00pm
Never used poor boys rim sealant as with other wheel wax/sealant it only lasts a few weeks. But a Nano sealant on the other hand will last a year if applied correctly.
Gtechinq C5 is what I use at the moment But Nanolex As super fox said make a excellent range of paint & glass sealants .
Other brands of Nano products are available
RE: Protecting new alloys - edgedata - 15-02-2013 11:02pm
(15-02-2013 08:57pm)Evogirl Wrote: Collecting new car in 2 weeks but need advice on something to coat my alloy wheels in so that they stay clear of road dirt etc, does anybody rate Poorboys?
I would highly recommend the G-Techniq Wheel Armour. I had my car detailed before delivery with the whole G-Techniq range and it is still looking like new after 12 months.
http://gtechniq.com/shop/3s-for-cars/exterior-coatings/c5-wheel-armour/
RE: Protecting new alloys - PhilSkill - 16-02-2013 12:04am
I'm running gTech C5 wheel armour but Also have Definitive wax Rotundus glaze as a top up protection, if you can, get a nano sealant on the backs as that's where the corrosion sets in
RE: Protecting new alloys - Evogirl - 16-02-2013 11:26am
Thanks for the replies looks like nanolex or gTech then.
RE: Protecting new alloys - WB - 16-02-2013 05:39pm
+1 for gtechniq C5 - PM me and I can get you a discount