+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Detailing & Car Care (/Forum-Detailing-Car-Care)
+--- Thread: gTechniq C6 Matte Dash (/Thread-gTechniq-C6-Matte-Dash)
gTechniq C6 Matte Dash - PhilSkill - 01-09-2012 09:06pm
Today spent a couple of hours getting a first coat of C6 Matte Dash on all trim in the Cabin.
A few Before Pics...
[attachment=2646] [attachment=2647] [attachment=2648] [attachment=2649]
Washed/dusted all surfaces with a damp Microfibre cloth.
Applied C6 simply by spray and polish with microfibre, finished with a clean microfibre all over.
[attachment=2651] [attachment=2652] [attachment=2653] [attachment=2654]
Gave a great finish just like new and no shinyness, even the gloss black looked great which came fantastic after the final buff.
[attachment=2656]
RE: gTechniq C6 Matte Dash - doug - 01-09-2012 10:51pm
Great job.
This is the only dash & trim treatment that I've found that really has that mat factory look. All you need is a damp MF to wipe over the surface now to keep that "new look"
Poor boys mat dash is good, but will still leave a shine if polished to much.
RE: gTechniq C6 Matte Dash - PhilSkill - 01-09-2012 11:09pm
Cheers Doug, Very easy to use, was concerned what it might do on the gloss, but looked great, even went all round the window trims and did the tailgate lining above my head! aswell as the centre door pillars and front seat backs which a few people have said damage easy.
Overall, easy and great finish!
Hoping it will help protect against the feet marks on the front door cards from getting out cleaned up a lot but couldnt completely remove them before coating.
Also hope it will help with the shiny white marks caused by resting my arm on the window ledge while driving. At least should be easy enough to clean.
RE: gTechniq C6 Matte Dash - kevoque - 02-09-2012 12:24pm
Gtechniq W2 is a good concentrated cleaner diluted in spray bottle and works well with this and on leather before using L1 or C6 all work well together !!Good job Phil !!
Kev