+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: General (/Forum-General)
+--- Thread: Passenger window not working properly ( resetting procedure does not fix ) RESOLVED (/Thread-Passenger-window-not-working-properly-resetting-procedure-does-not-fix-RESOLVED)
Passenger window not working properly ( resetting procedure does not fix ) RESOLVED - westiebj - 20-11-2017 06:35pm
Hi
I have an MY 2012 Dynamic Evoque Coupe and have a problem with the passenger window
When attempting to raise or lower the window it requires multiple presses of the switch to complete
It will raise/descend aprox 30mm and then stop. (movement is smooth and not sluggish) Another press of switch is required to continue and the same sequence is repeated until fully open / closed
The reset procedure described elsewhere to "reprogramme" does not resolve this
I have seen this issue posted by other owners on this forum, and others, but no fix has been suggested
Does anyone have any ideas / suggestions ?
Many thanks
RE: Passenger window not working properly ( resetting procedure does not fix ) - westiebj - 05-12-2017 07:56pm
All
Just thought I would give an update on this in case someone else experiences this in the future
First thing I did was check all connections, and unplugged, replugged all connectors as recommended in SSM 70498 .. Window Regulator Issue Checks
Unfortunately no improvement
I then invested in an iCarsoft LV 1.0 diagnostic tool and pulled up the following error code :-
B1189 .. Front Window Position Sensor - Signal invalid
Using the DTC tables on Topix this indicated a problem with motor / regulator
So I replaced the complete regulator assembly including motor with a new old stock item on Ebay (£40)
Solved ... now have a fully working window ... very happy