babyRR.com - The Range Rover Evoque Forum
Relay.fuse powerfold mirrors - Printable Version

+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: In Car Electronics (/Forum-In-Car-Electronics)
+--- Thread: Relay.fuse powerfold mirrors (/Thread-Relay-fuse-powerfold-mirrors)

Pages: 1 2

Relay.fuse powerfold mirrors - Brent1973 - 02-07-2016 02:42pm

Does anyone know where the relay is or even the fuse for powerfold mirrors .looking into retro fitting powerfold mirrors as loom in door is allready there.any help would be much appreciated.

Thanks

RE: Relay.fuse powerfold mirrors - PhilSkill - 02-07-2016 07:34pm

The Mirrors are wired from and controlled by the Drivers/Passenger Door Modules.

The Fuses for the Door Modules are 32 and 8 in the Passenger Fuse box

RE: Relay.fuse powerfold mirrors - Brent1973 - 03-07-2016 01:51am

Thanks for the quick reply.so no ford relay like older models.so in theory if the loom is there and i add powerfold mirrors and alter the ccf file i should be able to retro fit quite easily?

Thanks.

RE: Relay.fuse powerfold mirrors - mickeyf - 03-07-2016 10:27am

Hi, I've been looking at upgrading but tried to avoid removing door card before ordering.
What do you mean by the ccf file?

Thanks
(03-07-2016 01:51am)Brent1973 Wrote:  Thanks for the quick reply.so no ford relay like older models.so in theory if the loom is there and i add powerfold mirrors and alter the ccf file i should be able to retro fit quite easily?

Thanks.


RE: Relay.fuse powerfold mirrors - Brent1973 - 03-07-2016 10:41am

The ccf file is what land rover use when car is built . also know (as build file) this file contains things like wether it has halogens vs xenons .powerfold mirrors etc you can sometimes get a independent dealer to do this for you for about £35 to £60 or buy yourself your own tool and do it yourself.but i would check to see if you have the loom in the door first before buying mirrors.the door card is quite easy to get off.just get yourself some plastic trim tools so as not to damage anything.i didnt break any clips when i did both of mine.think that was more luck than out you can buy door looms just depend how far you want to go.

RE: Relay.fuse powerfold mirrors - PJRComputerSolutions - 03-07-2016 10:42am

(03-07-2016 10:27am)mickeyf Wrote:  Hi, I've been looking at upgrading but tried to avoid removing door card before ordering.
What do you mean by the ccf file?

Thanks

Hope if you go ahead with the MOD, that you can provide pictures & Step by Step instructions?

RE: Relay.fuse powerfold mirrors - Brent1973 - 03-07-2016 10:57am

Its quite strait forward remove door panel.remove mirror replace with new one replace every thing the important bit is reprogramming the the ccf file to regognize mirrors or they will not work
Just wanted to add reprogramming the car yourself will be dependant on the age unless you want to shell out alot of money for softwre.tools subscription etc as the software used has been
ajusted to download alot of files from online now

RE: Relay.fuse powerfold mirrors - mickeyf - 04-07-2016 08:17am

Hi, My car is 2013 Pure. I am trying to remove the door card so I do this only once ... I know how to do it however each time its removed there is a chance of damage. I need to order parts from abroad (generally UK) so want to have the bits in hand.

I have found fairly cheap powerfold mirrors but haven't seen the connecting looms - if someone can post what they look like maybe they are easy to make up.

Thanks for the information, I'll start looking for a pair of mirrors now!

Mike


(03-07-2016 10:57am)Brent1973 Wrote:  Its quite strait forward remove door panel.remove mirror replace with new one replace every thing the important bit is reprogramming the the ccf file to regognize mirrors or they will not work
Just wanted to add reprogramming the car yourself will be dependant on the age unless you want to shell out alot of money for softwre.tools subscription etc as the software used has been
ajusted to download alot of files from online now


RE: Relay.fuse powerfold mirrors - Brent1973 - 04-07-2016 09:31pm

I actualy have one for sale on ebay uk but i would check your loom first because i bought one for the same reason but now dont need it as loom was allready there so i would check first if its in one door it will be in other.mine was a 2012 coupe pure i have also upgraded to signiture lights.

RE: Relay.fuse powerfold mirrors - Brent1973 - 04-07-2016 11:40pm

Finaly retro fit powerfold wing mirrors now just have to find how to turn on puddle lights.