+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions)
+--- Forum: Modifications (/Forum-Modifications)
+--- Thread: LED Dome and Rear Bulbs (/Thread-LED-Dome-and-Rear-Bulbs)
RE: LED Dome and Rear Bulbs - bell-auto-services - 29-01-2012 07:13pm
All the inside LED's are 501 capless types with the execption of the boot which is a festoon of which I fitted a 32mm one from memory.
Mine arelike this http://www.ebay.co.uk/itm/ERROR-FREE-CANBUS-W5W-T10-501-LED-SIDE-LIGHT-BULB-13SMD-/270791953969?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f0c754e31
But any of these will do http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=501+led&_sacat=See-All-Categories
Pete
RE: LED Dome and Rear Bulbs - gw76 - 29-01-2012 07:31pm
The boot festoon will take 35- 38mm as the prongs are adjustable, 32mm seems quite short. Mine took a 37mm and popped in perfectly. As someone else mentioned the footwells will take much longer bulbs because the are open with no restricting covers
RE: LED Dome and Rear Bulbs - bell-auto-services - 29-01-2012 07:42pm
Thanks gw76 for the festoon clarification, Id hate for people to buy the wrong ones because I had advised wrong
Pete
RE: LED Dome and Rear Bulbs - gw76 - 29-01-2012 10:20pm
Im sure with a bit of vigerous bending of the prongs they'd take a 32mm too !
RE: LED Dome and Rear Bulbs - cutter7 - 29-01-2012 10:22pm
Once you have fitted the 37mm Festoon, and the 7, 501 capless type bulbs to complete the LED upgrade!
Might as well finish of with the Reversing LED bulbs..T15-W16W.
http://www.ebay.co.uk/itm/310359393318?ssPageName=STRK:null:IT&_trksid=p3984.m1542.l2649#ht_1427wt_1180
(these LED bulbs do not require the Canbus resistors to prevent error warning signals)
RE: LED Dome and Rear Bulbs - cjfp - 29-01-2012 10:25pm
Don't the reversing lights need to be canbus type?
RE: LED Dome and Rear Bulbs - cutter7 - 29-01-2012 10:33pm
(29-01-2012 10:25pm)cjfp Wrote: Don't the reversing lights need to be canbus type?
No straight plug and play everything ok on mine, installed yesterday.
RE: LED Dome and Rear Bulbs - cjfp - 29-01-2012 10:35pm
Nice, thx
RE: LED Dome and Rear Bulbs - fam1x - 30-01-2012 02:48am
(29-01-2012 05:52pm)gw76 Wrote: you could always set up an account on youtube post them on there and give us the link on here
Managed to get video on youtube
http://youtu.be/QSGeW5KOpnI
RE: LED Dome and Rear Bulbs - cjfp - 30-01-2012 11:00pm
(29-01-2012 10:20pm)gw76 Wrote: Im sure with a bit of vigerous bending of the prongs they'd take a 32mm too !
I refer you back to your post about you accessing the dome lights!
