Williams F1 ceramic coat - Printable Version +- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum) +-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions) +--- Forum: Detailing & Car Care (/Forum-Detailing-Car-Care) +--- Thread: Williams F1 ceramic coat (/Thread-Williams-F1-ceramic-coat) Pages: 1 2 |
RE: Williams F1 ceramic coat - kevoque - 07-05-2012 02:13pm Thankyou what prep has been done None !! An 18 year old and have seen it at Carlisle doing it the so called prep !! And all other garages they are 1000% profit on these coatings would you allow these guys I wouldn't and didn't and am so glad as I have seen what they can do and have done Kev RE: Williams F1 ceramic coat - charcoo - 14-07-2013 09:58am You must take everything that Lloyds tell you with 'a pinch of salt', just bought a RR from them a couple of months ago and being kind the salesman was mistaken but more likely just telling lies. Ie. Upgraded RR wheels when in fact they were after-market ones, the car has the park heater fitted ,not fitted and not possible to fit. hi - wecan438 - 30-09-2016 05:00pm (06-05-2012 08:16pm)kevoque Wrote: Thank you xxxx5 someone that sees sense also cheers !! RE: Williams F1 ceramic coat - AndyD - 30-09-2016 11:22pm The issue isn't the products you are buying it's the prep work that's key before the product is applied. The bodywork needs to scrupiously cleaned and every blemish taken out or the coating with just seal it in and you will never get the marks out unless you remove the coating. Unfortunately the "cleaners" at the dealers are not detailers and in general do not carry out the correct prep work and these coatings from them are just a waste of money. Please go to a 'real' detailer if you want really protect your new pride and joy. Take a look on detailing world if you want to see it done the right way http://detailingworld.co.uk Williams F1 ceramic coat - bigmac3161 - 01-10-2016 10:57am Kamazie ism coat https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fbabyrr%2Ecom%2Fforum%2Fshowthread%2Ephp%3Ftid%3D9867&share_tid=9867&share_fid=29564&share_type=t Or just do it ur self its not hard |