Anyone "upgraded" bulbs on a Pure (Halogens) - Printable Version +- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum) +-- Forum: Range Rover Evoque Discussions (/Forum-Range-Rover-Evoque-Discussions) +--- Forum: Modifications (/Forum-Modifications) +--- Thread: Anyone "upgraded" bulbs on a Pure (Halogens) (/Thread-Anyone-upgraded-bulbs-on-a-Pure-Halogens) |
RE: Anyone "upgraded" bulbs on a Pure (Halogens) - paisan - 07-04-2013 11:35am So , in a fit of pique I returned the blown bulbs to Osram UK . Received following response : Return bulbs had failed prematurely but there were no manufacturing faults. The filaments showed that a high voltage probably reduced life . Replacement bulbs enclosed as a good will gesture. So I have a spare set but....no idea how long they will last or what causes them to blow . Obviously I was driving at night , and had stereo on , heating , lights , but not heated seats. They go just driving along , not at initial engine turn on when you would think there would be a surge ( of sorts) . Also , because I didnt know what Osram were going to say I ordered a "spare" set but Ring bulbs instead . This is a reasonable price, if they ar egoing to fail in a few months,: http://www.ebay.co.uk/itm/New-Ring-HB3-XENON-ULTIMA-Max-Car-Headlamp-Headlight-Halogen-Gas-Bulbs-120-/160935453213?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item257880221d&ssPageName=RSS:B:STORE:GB:101 However would be interested to know how long the Crystal Vision bulbs last or if they also blow/fail. RE: Anyone "upgraded" bulbs on a Pure (Halogens) - MisterCK - 28-04-2013 05:23pm I'm about to give this a go... Having a 2013 Pure Plus w/ halogens, and having done HID swaps into projectors in previous cars. Will report back soon! RE: Anyone "upgraded" bulbs on a Pure (Halogens) - MisterCK - 28-05-2013 03:29am Alright.. reporting in... 2013 US Pure Plus. Purchased 5000K 35W Slimline HID kit from DDMtuning.com (no affiliation) for ~$50 USD including shipping. 1) Twist off cover from back of headlight 2) drill 7/8" hole in center of cover 3) run new light cables through hole 4) fit attached grommet to 7/8" hole, re-waterproofing the headlight housing 5) plug it all in 6) tiewrap the cables out of the way Done! About a 15 minute job total from start to finish. Nice and easy. Bright lights, maintains the cutoff, looks great, looks true-white and more closely resembles the foglight lighting. Highly recommend. And you don't need to 'overthink' it like so many are doing. No need for upgraded halogen lights. Just get the HID kit and do it. RE: Anyone "upgraded" bulbs on a Pure (Halogens) - Jonathon555 - 06-06-2013 08:32pm (06-04-2013 06:16pm)mbiegun Wrote: Ok, I've read all your discussion focused on factory installed Halogen bulbs HB3 upgrade. Best Choice seems to be Philips Crystal Vision HB3 4300. Did anybody experienced any problems with these bulbs? Bursting out? Overheating? Police interst in the lights colour? If not I will invest in this small upgrade for my Pure. Phillips crystal Yes my bulbs exploded after 6 months My mates exploded 3 days after my bulbs did Now running ring xenon bulbs |