Anyone got the detail ?
SSM63057 - Evoque 2012 onwards difficult to open doors in cold conditions
(I know this is linked to an existing thread but I couldn't find it! )
My doors stick badly in the cold weather, one morning I coundn't open the rear door. It's the rubber along the top edge of the door that sticks on mine.
A silicone spray rubbed along the thin strip along the top with a bit of rag stops the water freezing the rubber to the frame, worked for me!
(13-02-2013 09:52pm)PhilSkill Wrote: [ -> ]A silicone spray rubbed along the thin strip along the top with a bit of rag stops the water freezing the rubber to the frame, worked for me!
Yeah, but what does the Topix rpt say ?
(14-02-2013 12:18am)cjfp Wrote: [ -> ]Yeah, but what does the Topix rpt say ?
There must be a new software upgrade for that....
Get a Coupe. Does not stop the problem, but there are less doors to stick.
(14-02-2013 05:27am)invoke Wrote: [ -> ]There must be a new software upgrade for that....
Yes it's to remove the seal & not fix the under laying problem.
I know the RRE was cold tested, but I bet it was stored in the heated test station garage over night.