Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Evoque overhead console removal
chrisell
 

Posts: 24
Joined: Feb 2013
Location: Utah, USA
Post: #1
Evoque overhead console removal

After googling for a while I couldn't find any pictures where anyone had removed the overhead console from the roofliner in their Evoque. I persevered and got mine out today. This topic is really just so anyone searching in future might benefit from the photo I took. You can see where the two spring clips are at the rear edges. This is where you can use a clean screwdriver or panel removal tool to lever the console out if you ever need to.
[Image: f3953a2a001ab7f6991665b0b026c3de.jpg]

Chris.
12-03-2017 06:40pm
Visit this user's website Find all posts by this user Quote this message in a reply
Stilolos
 

Posts: 49
Joined: Aug 2015
Location: Uk
Post: #2
RE: Evoque overhead console removal

What model year is your Evoque? Mine is a 2014 and it has a thin strip and 3 leds where the lights are. My drivers side map light has stopped working and I want to make sure it's the same.
12-03-2017 06:46pm
Find all posts by this user Quote this message in a reply
PJRComputerSolutions
 

Posts: 59
Joined: Apr 2016
Location: United Kingdom
Post: #3
RE: Evoque overhead console removal

Can you do a picture of the Reverse Side?
12-03-2017 09:06pm
Find all posts by this user Quote this message in a reply
marsie
 

Posts: 7
Joined: Mar 2019
Location: Sheffield
Post: #4
RE: Evoque overhead console removal

Thanks for tis. Just removed my overhead console to cure an annoying rattle. Turned out to be the round sponge insert in that blanks the second unused sensor hole
29-03-2019 10:01pm
Find all posts by this user Quote this message in a reply
Derek Brown
 

Posts: 12
Joined: Mar 2019
Location: UK
Post: #5
RE: Evoque overhead console removal

(12-03-2017 06:40pm)chrisell Wrote:  After googling for a while I couldn't find any pictures where anyone had removed the overhead console from the roofliner in their Evoque. I persevered and got mine out today. This topic is really just so anyone searching in future might benefit from the photo I took. You can see where the two spring clips are at the rear edges. This is where you can use a clean screwdriver or panel removal tool to lever the console out if you ever need to.
[Image: f3953a2a001ab7f6991665b0b026c3de.jpg]

Many thanks for posting this, it's always far easier to remove these things when you know what type of clips are used and where they are loated. Your picture is worth a thousand words.

Thank You.

Derek
01-04-2019 05:57pm
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)
babyRR is an independent web site and not affiliated with Land Rover