babyRR.com - The Range Rover Evoque Forum
Tow bar help - Printable Version

+- babyRR.com - The Range Rover Evoque Forum (https://babyrr.com/forum)
+-- Forum: Regional Discussions (/Forum-Regional-Discussions)
+--- Forum: Australia & New Zealand (/Forum-Australia-New-Zealand)
+--- Thread: Tow bar help (/Thread-Tow-bar-help)



Tow bar help - mnd - 18-02-2013 07:12pm

Hi all,
I've read the info on tow bars in the other sections but I'm looking for anybody who knows where to find a tow bar for a dynamic which ISN'T a Hayden reese. Some of the other solutions from the UK are much less intrusive and look better but I can only find people who supply Haymen. Does anybody else know of other bars you can get in Aus. Ideally anyone with experience fitting something in Melbourne

Thanks
Mark


RE: Tow bar help - Hamish - 02-04-2013 08:49am

Hi Mark.

I bought one from PF Jones in the UK.

From memory it was about 430 pound for the bar, plug in electrics & postage. A bit under $650 AU.

It was delivered in 7 days

It is a Westfalia detachable, swan neck type.

ADR rules say in should have a manufacturers name plate & a safety chain connecting point. It has sticker & the safety chain connecting loop.

I remove the swan neck & keep it in the boot next to the spare wheel.

You cant see the bar when not in use.

The blurb says to cut the bumber a little at the bottom, I didnt & the bar fits behind the platic but pushes the bottom lip out & down about 10mm.

You would never spot this unless you were supper keen & I recon I could remove the bar without anyone noticing it was ever fitted.

I fitted it myself in a morning, this was steady takining photo's as I went along.

Look at some of the UK tow bar threads & you'll get the idea.

I can provide hints & photo's, but cant help with fitting if you go this way as I'm in NSW.

Hope this helps