Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Retrofit / Upgrade - Touch Plus to Touch Pro
big_g_uk
 

Posts: 1
Joined: Mar 2018
Location: UK
Post: #1
Retrofit / Upgrade - Touch Plus to Touch Pro

Hello all,

I have a 16' HSE Dynamic 2.0D, and really want Android Auto in the car. Apparently, the car has a Gen 2.1 system with an 8" screen and buttons down either side. I had installed an aftermarket screen interface with Android media that retains the RR OEM screen and touch capabilities, however it created so many other issues I had it removed. In various places I have seen the Chinese 10.25" Android screens, and after having one in a previous car (Mercedes) I don't want one again.

So, another thing I thought about was to retrofit/upgrade the OEM navigation system from the Touch Plus to the Touch Pro. I'm not even sure if this is possible but thought I raise the question.

Questions looking for help with -
- screen mounting holes in the same location
- dash trim that fits around the screen need changing
- can screen be changed over without changing any other hardware?
- Parts list / Part number list
- Would a dealer need to connect with RR software to enable/change settings via OBD?
- I can't be the first person who has asked, has anybody looked it to doing the upgrade and what was the outcome?

Thanks
18-08-2019 02:41am
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)
babyRR is an independent web site and not affiliated with Land Rover